Product #UC110
Upholstery is clean and dry in minutes, not hours.

The HOST® Aridex is designed for professional cleaners who clean upholstery in homes and offices, movie theaters and auto, bus, trains, subway cars and private airplane interiors. Safely clean most upholstery fabrics and leather furniture quickly and easily, never any shrinkage or sticky residue. The Aridex machine and detergent work together to create a special dry foam, which is worked onto fabric surfaces with a counter-rotating brush action that agitates the foam while stabilizing the fabric. Dry foam encapsulates the dirt and are removed by vacuuming.

Features

Compact Design

Slide out handle extends for travel, which allows for easy transport.

Low Moisture

No sticky residue left behind. Uses low moisture foam for extremely fast drying, so you can get back into service quickly.

Easy to Clean and Use

The counter-rotating-brushes in the powerhead does the work, while you just guide it along the upholstery fabric.

Product Specifications

Included: Measuring gauge and fill funnel.

Motor Base Unit: 4 HP
Brush Unit: 1/10 HP @ 7,300 RPM (full load) 24 volt DC Sealed unit; no lubrication required
Power Supply First: 115 Volt, 50-60 Hz, 9 amp (220 volt, 4.25 amps)
Secondary: 24 Volt DC (built into base unit)
Controls Rocker switch mounted on panel controls motor and power to 24-volt receptacle. Toggle switch to control polarity of 24-volt receptacle.
Wattage 1035 Watts (935 Watts)
Power Cord 30 feet (9.1 meters), 16 gauge, 3-wire grounded, non-marring
Brush Speed Inner: 750 RPM; Outer: 375 RPM
Brush Construction High density polyethylene backs with straight bristle tynex tufts.
Brush Diameter Inner: 2.4375 in. (6.2 cm); Outer: 4.25 in. (10.8 cm); Bristle length 1 in. (2.5 cm)
Brush Unit Bearings High speed ball type; double sealed
Drive Train First Stage: Hard coat surface treated, maintenance-free metal gears.
Second Stage: Spur gears, lubricated by foam detergent.
Control Single, three position toggle switch permits fingertip control of brush unit drive motor and selective full/intermittent flow of foam.
Dimensions Base Unit: 30″ L x 18.5″ W x 19.5″ H (76.2 cm x 46.99 cm x 49.53 cm)
Brush Unit: 10″ L x 8″ W x 8″ H 2-channel, 15 ft. hose (25.4 cm x 11.4 cm x 20.3 cm, 4.6 m hose)
Weight Base Unit: 51 lbs. (23.1 kilos)
Brush Unit: 9.5 lbs. (4.3 kilos)
Shipping Weight 81 lbs. (36.8 kilos)
Tank Size Solution Tank: 2 gallons (7.6 liters)
Recovery Tank: 1 gallon (3.8 liters)
Lubrication None

   

Videos

Parts & Accessories

Products

X