HOST® Dry Extraction Cleaner
HOST® Dry Extraction Cleaner contains a balanced blend of water and green cleaning chemistry with reduced VOCs. As the low moisture HOST cleaner is brushed through the carpet, the micro-sponges deep-clean-extract by dissolving, trapping and removing spots, spills, sticky water soluble soil and greasy oily dirt. HOST cleaner holds and controls the cleaning liquids, so dissolved dirt doesn’t run into the carpet backing or grout/textured floor indents. After vacuuming up the HOST cleaner, flooring is clean, dry and back in service. HOST is natural, non-toxic, biodegradable and safer for people and pets.
Features
Green Seal Certified
HOST Dry Extraction Cleaner meets the Green Seal environmental standard for industrial and institutional cleaners based on its reduced environmental toxicity and reduced VOCs.
Safe to Use on All Types of Carpet
HOST Dry Extraction Cleaner is safe to use on all types of carpet including stain-resistant and natural fiber carpet such as wool and sisal.
No Disruptions
HOST Dry Extraction Cleaner requires no downtime. The floor is immediately ready for use, no need to wait hours or days for the flooring to dry.
Extended Floor Life
The HOST Dry Extraction Cleaner removes the risk of carpet shrinkage, seam splitting, browning and distortion of carpet pile.
Reduces Allergens
When applying HOST and brushing it through and then vacuuming up the HOST cleaner helps reduce allergens and improves indoor air quality*.
100% Biobased by the USDA
HOST Dry Extraction Cleaner is certified as 100% biobased by the USDA and is designated for federal purchasing in the BioPreferred® program.
*The HOST System of applying HOST Dry Extraction Cleaner to the carpet, brushing it through the carpet and then vacuuming up the HOST cleaner removes dirt and reduces allergens. Research studies have shown that one cleaning with the HOST System using HOST machines reduces: Dust mites by 78%; Dust Mite Allergen by 75%; Cat Allergen by 85%; Mold Spores by 85%. EPA Establishment Number: 074202-WI-001. Additional allergen removal research shows that just one cleaning using the HOST Liberator or Freestyle with HOST Dry Extraction Cleaner reduces mold spores by 97% and dust mite allergen by 89%.
How To Use
1
Vacuum and pile lift carpet thoroughly or sweep flooring before applying HOST cleaner. The more carpet vacuuming you do, the better the results.
2
Apply HOST cleaner to the floor, about one handful size for each square yard (3′ x 3′). Do not apply more than 100 to 200 square feet at a time or the HOST cleaner could dry out and not clean as well. For the HOST Applicator, place HOST cleaner into the applicator and choose light, medium, or heavy setting. Then guide the HOST Applicator over the area to be cleaned. As it rolls, it dispenses the chosen amount of micro-sponges.
3
Work HOST into the soiled area using the suitable HOST equipment or brush, using brushing strokes in a north and south, east and west and then north and south direction. This brushing action distributes the HOST micro-sponges and brings them in contact with the dirty surfaces of what you are cleaning.
4
Remove damp or dry HOST from carpet or hard surface with HOST extractor or conventional vacuum. For hard surfaces one may need to follow up with a damp mop. NOTE: If an area requires more cleaning, repeat steps 2 and 3 or consider pretreating using a mist of PREP® or Spot Remover. Then apply more HOST and clean as before. Depending on the fiber and conditions you are cleaning, you may need to use HOST SJ and Spot Remover as the pre-mist. Refer to the HOST SJ cleaning tips as your guide.
Videos
HOST Calculator
Use our calculator to estimate how much HOST Dry Extraction Cleaner for your job.
This calculator is to be used as an estimating tool only.
Units Needed: